Complete Guide: How to Install a Nest Learning Thermostat?

How to Install a Nest Learning Thermostat

The Nest Learning Thermostat is an energy-saving device that can be programmed and controlled remotely. It uses sensors to detect temperature and adjusts it accordingly, saving energy and reducing costs. It also has a feature that allows users to access their Nest account from any device, making it easy to control the temperature from anywhere. The thermostat also has a “Nest Leaf” feature that shows users when they are saving energy. Overall, the Nest Learning Thermostat is an efficient and cost-effective way to save energy. It is also crucial for users to know how to install a Nest thermostat.

 

There is also a need to properly install Nest thermostat so you can quickly start using it. It is a simple process and you can set it up without the help of an electrician. Sometimes it can be complicated to set up a Nest Learning Thermostat correctly, but it will make your life a lot easier. Here we can discuss all aspects of Nest thermostat installation.

 

Things Before Installing Nest Thermostat

Smart thermostats must be compatible with your home’s HVAC system to be installed. When your home has a high-voltage HVAC system (heating, ventilation, and air conditioning), the Nest Learning Thermostat will not function. You can check your thermostat’s compatibility with your HVAC system using the Nest compatibility checker.
There is a need to follow the below steps to use the Nest compatibility checker.

  • First, there is a need to visit the official website of the Nest thermostat.
  • Here you can choose to Get Started button so you can start the wizard.
  • Make sure the wiring on your original wall thermostat is correct by following all the on-screen instructions.
  • Before selecting Yes, continue, you will need to enter the wire labels on your original thermostat.
  • Once you entered your wiring, Nest thermostats compatible with your system will appear.

 

After the Nest compatibility checker, there is a need to start the process of how to install Nest thermostat. It is also imperative to follow all steps properly so you can quickly complete the Nest thermostat installation.

 

How to Install a Nest Thermostat

There is a need to set up the Nest thermostat perfectly so it is vital to follow all steps accordingly. Here you can check the steps for Nest thermostat installation.

 

Unpack and Prepare Your Nest Thermostat

When you receive your new Nest learning thermostat it is important to unpack it quickly. It comes with the below things in its pack.

  • Nest thermostat
  • Screwdriver
  • Screw set
  • There is also an optional trim plate and a Nest base plate.
  • It comes with an installation guide and wire stickers.
  • There is also a Nest thermostat base for wiring. ( It is a type of adapter for existing thermostat wiring.)

Before disconnecting the wiring from the existing thermostat, you’ll need to remove the wiring sticker sheet. For the steps below, you won’t need any special connectors or tools.

 

Remove Your Old Thermostat and Prepare the Wiring

There is a need to install the Nest app for Android or Nest app for iPhone. After this, you can go through the process of wiring. Using the steps below, you can complete the DIY wiring process without installing the app.

  • You can turn off your heating and cooling systems in your breaker box by turning their circuit breakers to “OFF.”. Make sure to check both switches as some systems have separate breakers for the heating and cooling systems. Once you have turned the breakers off, wait at least five minutes before turning them back on. This will ensure that the systems have time to reset.
  • Make sure that the power has been turned off at your old thermostat. Usually, the display will be blank, or if it isn’t, try enabling air conditioning or heating and verify that they don’t turn on. You can now remove the faceplate of your old thermostat from its base. All the wiring is visible underneath. ( There is also a need in some models to remove the remove batteries before removing the faceplate).
  • Don’t forget where each wire goes by taking a picture of the thermostat wiring. Apply the appropriate sticker letter to the wire using the stickers included in your Nest thermostat box.
  • You can then identify where those wires were connected. You will need the Nest screwdriver to disconnect the wires from the terminals on your old thermostat. Ensure that any jumper wires have been removed.
  • There is a need to remove the old thermostat trim plate which is located on the wall. It also includes a Philips attachment on the Nest screwdriver.

After this, you can start how to install a Nest thermostat process.

 

Install Nest Thermostat On Wall

It’s now time to install the Nest thermostat hardware. You can either use the optional trim plate or the box plate depending on how your original thermostat was mounted. It is best to use a trim plate.

  • You can either use the trim plate or box plate to mount the Nest base for wiring. Upon attachment, it snaps into place and is positioned on the wall after threading the wires through the center hole.
  • You can do this until you have a bubble in the middle of the bubble level on the thermostat wiring base plate. By screwing the Phillips screws into the top and bottom screw holes of the base plate, you will secure it to the wall.

Note: You will need to attach the self-tapping screws to the drywall where your old thermostat was located.

  • Each wire’s bare copper end is push into the appropriate hole by pressing the thumb tabs on each port. You can use the stickers you attached to each wire as a guide.
  • On the wiring base, you can carefully slide the Nest thermostat. The gray port at the bottom of the base ensures that the gray port on the back of the Nest thermostat fits correctly.
  • Put your heating and air conditioning circuit breakers back on at the circuit box. When you return to the Nest thermostat, it will boot up and display the language selection menu.
  • You can select your setting by turning the outer frame of the Nest and pressing down on the face of the thermostat. You will be guide through some initial setup steps after installing the Nest, including displaying the HVAC equipment it has detected through the install wiring.
  • It’s important to tell Nest that you’re a homeowner doing their installation, not a “Nest Pro” (even if you consider yourself a pro!).
  • There is a need to review detected equipment and it is necessary to make sure that you attached your equipment properly.
  • You will need to select Continue several times to confirm your system equipment. After that, you’ll have the option to select the fuel type used by your heating system. You can select it by twisting the Nest frame or pressing in on the Nest display.
  • Here you can select the type of heating system. It is vital to follow the same process that is describe in the last step.
  • Start the Nest app setup process. You can select this and continue by pressing the Nest screen.
  • On your mobile device, launch the Nest app. To view this Nest thermostat’s entry code, press on the Nest screen when you see the option to enter the entry code.

After following all the above steps for Nest thermostat installation there is a need to go for the setup process of the Nest app. It is important to complete the installation process and start using the new smart thermostat.

 

Complete Setup With the Nest App

Upon launching the Nest app on an Android or iPhone, you will be prompt to log in with your Google account. Your Nest will need to be connect to your existing Google Home account. Your Google Nest account information will need to be migrate to your app if you previously had one.

  • You will be guided through the necessary steps to complete either one or both of these tasks when you log in to the app. A Nest account must be created if you haven’t already.
  • When you log into your Nest account, tap Add Product to add your new Nest thermostat.
  • There is a need to scan the QR code on the back of the thermostat. Here you can tap on Start Installation on the next screen.
  • When you complete the hardware installation of the Nest thermostat, there is a need to tap on the generation of your Nest thermostat.
  • Here you can tap go to the next couple of screens and get the entry key screen. It also needs to confirm the wiring diagram.
  • There is also a need to have low voltage.
  • Enter the code on your thermostat if it does not already display it. You can then enter the code displayed on your thermostat in the Enter key field. The next step is to select your Wi-Fi network from the list of available networks, and then click Next to confirm your account.
  • The next step is to tap the location where your thermostat is install. Whenever you’re not home, adjust your “Eco Temperatures”, which are just the minimum and maximum temperatures you’re okay with your house getting to. The final setup screen will ask you to tap Next, followed by Done.
  • As soon as you complete that final step, the Nest home screen will appear in the app. Your current temperature settings will be display here. On this screen, you can also change the settings on the thermostat.

 

Now you can use your Nest thermostat. It is also crucial to follow all steps properly at the time of installing Nest thermostat.

 

Final Words

You can easily complete the process of installing Nest thermostat. It is also important to follow all steps correctly so you can quickly set up it and use them. It is also critical to use the Nest compatibility checker.

 

More About Visit at: smartdevicehelpline.com

Leave a Comment

Your email address will not be published. Required fields are marked *